Subscribe to RSS

Posts tagged as: monoplaza back to homepage

Toro Rosso to select Red Bull talent for 2012 seats Toro Rosso to select Red Bull talent for 2012 seatsComments Off

Toro Rosso will not select from outside of Red Bull’s own talent pool for its 2012 driver lineup, team boss Franz Tost has confirmed.
It is believed Sebastien Buemi, Jaime Alguersuari, and young Red Bull hopefuls Daniel Ricciardo and Jean-Eric Vergne, are all in the running for the Faenza based team’s two race seats next year.

“It is 100 per cent certain that next year we will have two Red Bull drivers,” Austrian Tost told the Sportwoche publication.

“That is the meaning and the purpose of why Red Bull bought the team,” he added.

“Our job is to allow young drivers from the Red Bull pool to enter formula one in training for (the move to) Red Bull Racing,” said Tost.

Since the Minardi takeover in 2006, however, the only driver to successfully move from Toro Rosso to the premier team is Sebastian Vettel.

“The reasons for that are simple,” said Tost. “First, he is more talented than the others.

“He is also more disciplined, brings more passion for the sport, is more innovative, open and more flexible in accepting suggestions to make himself better. And that’s why he’s the world champion,” he added.

“In their development too many drivers get to formula one and think ‘Now I have made it’. Actually, the hard work has only just begun. Everything before is kindergarten.

“In formula one you have to live formula one, 100 per cent, yet only a few do that completely,” said Tost.

Virgin Racing presents the VR-01 online Virgin Racing presents the VR-01 onlineComments Off

Virgin Racing, is the first team -of the four that participate this year-, that reveals details of its first single-seater, the ‘VR-01′ that will be presented tomorrow in the racetrack driven by the German, Timo Glock and the Brazilian, Lucas di Grassi.

The ‘scuderia’ that had problems with the presentation of its car ‘online,’ but that shows details of it, tomorrow will test the single-seater in the British circuit of Silverstone.

The Technical Director of Virgin Racing, Nick Wirth, underlined that to join an F1 team, mount an engineering group and design a new car from scratch is “an epic pursuit after having such a short time.”

The new single-seater’s design has been entirely done with assisted systems (CFD), instead of a wind tunnel, and for Wirth “it is not surprising to see the skepticism created by the system we have used.”.

“We’re competing in sport that is experimenting a significant change to be able to face today’s tough economic reality.  I have absolute faith in the digital design’s process and in the opportunity to test a total CFD design at the highest level.  It means to show that this could well be the path for the Formula One future.  That’s very, very exciting,” he expressed.

“We have come up with a car that has a first class design and that will benefit from a high degree of aerodynamic efficiency and stability.  Reliability has been an important element in its design and together with all the key areas to comply with FIA’s safety rules and the crash test requirements,” assured Wirth.

Virgin’s Team Principal, John Booth, commented on all the difficulties involved in the process, being a “a counter clock race to design and develop a racing car, and simultaneously, putting together a new team of people and the installations.”

“I’ve always had absolute trust in Nick’s ability to design a good car, and I’m hopeful that the team will make a good job when they roll it out.  After working closely with technical team during the last 10 months, I know that the VR-01 is the result of a very intense and deep design, and I feel excited to think of its debut in the racetrack,” he added.

Tomorrow, it will be possible to see the VR-01 in the British Silverstone racetrack, even though there will be no other references of other single-seaters running through the British circuit.

Mercedes W01 Analysis Mercedes W01 AnalysisComments Off

In its striking silver and black, the new nose of the single-seater does remind us of Brawn’s BGP01, but if we look closely it’s very different.  The middle part of the nose is much higher, reaching above the front wing, together with the typical V shape of the Red Bull RB5 V.  The car has its nose edge higher at both sides right up to the cockpit opening. (look at the detailed picture below.)

The underside of the nose is rounded off, also as the RB5, but with less height in the front suspension mounts which are joined to the chassis by a small keel.

Around the driver, the sidepod entries have changed less, maintaining the air inlets that are now bulky in comparison to what McLaren and Ferrari have presented in 2010. The wing mirrors have been kept very simple.

Front detail of the Mercedes W01

This racing car may be one of the most innovative, not having anything to do with the adjustments made for his official presentation in Germany.  The airbox, apart from being an air inlet, its main objective is to be a roll hoop for the pilot in case of a crash.  Due to this, the teams usually reinforce the airbox walls with carbon fiber so that it matches the required strength.  Up to here there’s nothing we don’t know, but Mercedes has gone a little farther applying a completely different concept.

W01 Airbox

Here, the team has chosen to build the roll hoop as a vertical column providing a thick support on the centerline of the car.  So an air inlet must also be provided.  If you watch closely, the airbox is divided in two, with an air opening much larger than we are used to.

A little more to the back, there is a small opening on each side of the airbox, providing cooling air for some components that sit more rearward in the car.  It is understood that Mercedes and several other teams have chosen to move some components to sit in the low rear to make place for the larger fuel tank.

Despite the fairly bulky shape of the sidepods with a remarkable lack of undercut, the rear end of the car is extremely mince, leaving most of the suspension components open to free airflow. The team have made the bodywork so narrow that many of the components protrude.

Specifications

  • Chassis: Construction Molded carbon fiber and honeycomb composite structure
  • Suspension: Wishbone
  • Dampers: Sachs
  • Wheels: BBS forged magnesium
  • Tyres: Bridgestone Potenza
  • Brakes: Brembo calipers, discs/pads Carbon/Carbon
  • Steering: Power assisted rack and pinion
  • Electronics: FIA standard ECU and FIA homologated electronic and electrical system
  • Gearbox: Seven speed unit with carbon composite maincase
  • Gear selection: Sequential, semi-automatic, hydraulic activation
  • Clutch: carbon plate

Dimensions

  • Overall length: 4800mm
  • Overall height: 950mm
  • Overall width: 1800 mm

Motor

  • Type: Mercedes-Benz FO108X
  • Capacity: 2,4 liters
  • Cylinders: 8
  • Maximum rpm: 18.000 (maximum FIA regulation)
  • Bank angle: 90 °
  • Piston bore: 98 mm (maximum FIA regulation)
  • No. of valves: 32
  • Weight: 95kg (minimum FIA regulation weight)
Renault R30 analysis Renault R30 analysisComments Off

There were high hopes of a remarkable racing car on January 31st when the Renault R30 was unveiled, with a front wing that resembles very much the 2009 version, even though Alonso had pinpointed that that was precisely one of the main problems of the 2009 car.

Nevertheless, next day the car that made its debut in the racetrack and the characteristics of the front wing of three stacked elements was totally different.  Specifically, it’s very similar to the one that McLaren has.

The changes made on the R30 are very deep and one has to pay much attention.  The rear wing is also new, with a drop in the middle where the sharp fin gives it the aerodynamic support.

The nose’s cone is absolutely different from the rest of the scuderias, contrary to the 2010 trend which is V shaped.  Even though it is still a bit bulky, it lacks the extra protuberance underneath, with the purpose of gaining more resistance.

The wings are a clear evolution and contrary to the other three cars previously launched by Renault, the R30 has huge sidepod air inlets that extend down to the vehicle’s floor.  Instead of rectangular air inlets (more conventional) they are bigger in the high part than in the low one.

There’s no doubt that the team is quite interested in the temperature, because over the engine’s cover are connected heat stickers.  The engine’s exhaust have been moved towards the back and more to the middle of the car.

Specifications

  • Chassis: Molded carbon fiber and aluminum honeycomb composite monocoque, manufactured by the Renault F1 Team and designed for maximum strength with minimum weight. RS27-2010 V8 engine installed as a fully-stressed member.
  • Front suspension: Carbon fiber top and bottom wishbones operate an inboard rocker via a pushrod system. This is connected to a torsion bar and damper units which are mounted inside the front of the monocoque. Aluminum uprights and OZ machined magnesium wheels.
  • Rear suspension: Carbon fiber top and bottom wishbones with pushrod operated torsion bars and transverse-mounted damper units mounted in the top of the gearbox casing. Aluminum uprights and OZ machined magnesium wheels.
  • Transmission: Seven-speed semi-automatic titanium gearbox with reverse gear. “Quickshift” system in operation to maximize speed of gearshifts.
  • Fuel system: Kevlar-reinforced rubber fuel cell by ATL.
  • Cooling system: Separate oil and water radiators located in the car’s sidepods and cooled using airflow from the car’s forward motion.
  • Electrical: MES-Microsoft Standard Electronic Control Unit.
  • Braking system: Carbon discs and pads (Hitco); calipers and master cylinders by AP Racing.
  • Cockpit: Removable driver’s seat made of anatomically formed carbon composite, with six-point harness seat belt by OMP Racing. Steering wheel integrates gear change and clutch paddles, front flap adjuster.

Car dimensions and weight

  • Front track: 1450 mm
  • Rear track: 1.400 mm
  • Overall length: 5050 mm (250 mm more than R29)
  • Overall height: 950 mm
  • Overall width: 1800 mm
  • Overall weight: 620 kg, with driver and cameras

Engine

  • Designation: Renault RS27-2010
  • Capacity: 2400 cc
  • Architecture: 90° V8
  • Weight: 95 kg
  • Max rpm: 18.000 rpm
  • ECU: McLaren Electronics Standard ECU
  • Fuel: TOTAL
  • Battery: Renault F1 Team

BMW Sauber C29 Analysis BMW Sauber C29 AnalysisComments Off

Although BMW decided to interrupt the development of its single-seater in the middle of the season, the C29 is the result of the permanent evolution of the BMW Sauber F1.09.  In its first test in Valencia in February 1st, one could see its front aileron clearly influenced by the 2009 Brawn GP design.

The nose’s cone drops a little further down, after an update similar to the one already carried out last year.  The top part of the nose is now almost flat, from the pilot’s cockpit to the tip of the racing car.  The front aileron is carefully sculpted to improve the nose’s air flow condition.

The front suspension has been modified and has an independent steering arm to help the front aileron work more efficiently.

Also, following Brawn’s example, the sides have smaller air inlets and big pontoons, the mirrors mounted over them.  We have seen that the rear part has a more pronounced drop to provide with better air flow towards the rear aileron.  As a result, most of the rear suspension arms are open for air flow.  Once again, the racing car’s sculpture has been optimized to improve the new double diffuser.

Specifications

Chassis: Carbon-fiber monocoque.
Suspension: Upper and lower wishbones (front and rear), inboard springs and dampers, actuated by pushrods (Sachs Race Engineering).
Brakes: Six-piston brake callipers (Brembo), carbon pads and discs (Brembo, Carbon Industries).
Transmission: Ferrari Seven-speed quick shift gearbox, carbon, longitudinally mounted, carbon-fiber clutch.
Chassis electronics: MES
Steering wheel: BMW Sauber F1 Team
Tyres: Bridgestone Potenza
Tyres: OZ

Dimensions

Length: 4.940 mm
Width: 1.800 mm
Height: 1.000 mm
Track width, front: 1.495 mm
Track width, rear: 1.410 mm
Weight: 620 kg (including driver, tank empty)

Engine

Brand: Ferrari, 056 engine
Type: V8 natural aspirated engine, 90 degree cylinder angle
Cylinder block: sand cast aluminum
Valves / type: 32 / tyres
Cylinder: 2.398 cc
Diameter: 98 mm
Weight: kg> 95
Injection: electronic injection

Exclusive: The Ferrari F281 Exclusive: The Ferrari F281Comments Off

After the initial news we published a few hours ago on Ferrari ‘F281′ that Fernando Alonso will drive this season 2010, Banco Santander has given a press conference with the first high quality image of the Italian car.

The information disclosed by the Director General of the Communication Division of Banco Santander, Juan Manuel Cendoya, said: “We want to be the trademark of Formula 1″, making clear that the entity is present in the Grand Prix of Germany, Italy and United Kingdom’s first sponsor and Brazil and the two tests in Spain, Valencia and Montmelo, as the second.

The global launch of the 2010 design will not leave Ferrari fans unmoved Ferraro, white addiction can not be taken very well by tifossi although not the first time the Ferrari car parts is blank. In fact, in 1975 the ‘cockpit’ It was white and was the year that the Austrian Niki Lauda won his first world championship. However, the aerial view is far from what we’re used to seeing red bullets.

Cendoya said he “supported the decision” to sign Ferrari Fernando Alonso, who signed a five-year contract with Ferrari, but this was unique to the ‘Scuderia’. “We have supported much the firm, we were three years behind it, although Ferrari had the last word,” said head of communications.

While acknowledging that sports sponsorship is “a major risk factor than conventional advertising,” considers that the bank’s presence in the ‘great circle’ will be a “major emotional link” with some sectors of its customer base, especially young , and “a global reputation.”

Imminently, Banco Santander will launch the campaign ‘Red Passion’ in Spain. “We are delighted to swing much of the advertising of 2010 in Fernando (Alonso),” said

The 2010 Ferrari F281 is bi-colour The 2010 Ferrari F281 is bi-colourComments Off

The F281, the new car of Ferrari for the 2010 season will be two colors, red, the color characteristic of the ‘Prancing Horse’, and white, for the sponsorship of Banco Santander. The rear wing and front will be white with red letters.

As if this were not enough change for the first time in history, next to the logo of the team (the ‘Prancing Horse’), it is the name of the bank, whose logo will also be painted in white on the mirrors.

The world premiere of this design was made today at the Ciudad Financiera del Banco Santander in Madrid town of Boadilla del Monte at a meeting of Juan Manuel Cendoya, CEO of Communications Division of the entity, with specialized areas.

Questions & Answers to Heikki Kovalainen for the 2010 season Questions & Answers to Heikki Kovalainen for the 2010 seasonComments Off

Last season Heikki Kovalainen stuck his way. Twin with Lewis Hamilton at McLaren for a second year, he struggled to get the most out of the MP4-24 and finished the championship 12th, 27 points adrift of his illustrious team mate.

This season Kovalainen have a different challenge as he competes for one of 2010’s four new teams – Lotus. Following is the interview that the official F1 have done to Kovalainen.

Q: Heikki, you have switched from massive manufacturer team to small, private outfit this year. How are you finding the change?

Heikki Kovalainen: Obviously McLaren is a very big team, but as we saw last year, it doesn’t necessarily mean they will always be quick. They can obviously turn it around quickly, but I see a lot of potential at Lotus and that’s why I decided to come here. At the beginning it will be tough, we’ll have a hard first few months, but once we get going, I think I’ll have a better opportunity here than I would do with anyone else.

Q: You are so familiar with the inner workings of McLaren. How do you think the departure of Mercedes will change the team?

HK: I don’t really know. It’s obviously a big change for them but they’re a big team and, to be honest, it’s not really my business anymore!

Q: While McLaren’s image is quite reserved, Lotus seems a bit different, especially with the fun and relaxed Tony Fernandes at the helm as team principal. It must be quite a change. Are you already comfortable in the more laidback environment?

HK: I think they are very different teams, but I did have a good time with McLaren. We tried as hard as we could to get the best results, but it just didn’t work out for me as it should have done. However, what I can do is bring what I learnt there. They are highly motivated, and they always push to the maximum to achieve the best result. I think I can bring that here and it will work well at Lotus as well.

Q: There must have been many times during 2009 when you doubted you’d be able to stay in Formula One racing. How did your deal with Lotus come about? When did it all happen?

HK: The deal was eventually signed quite late, but the team first contacted me directly during the season, asking me what my situation was. At that point I didn’t know anything really about Lotus. I was concentrating on finishing the season well. I had a number of options, but with rumours going around about some teams struggling for money, I was interested in talking to Mike (Gascoyne) and Tony, as I knew they had a stable budget for the next three years and a strong technical team joining later. In the end it was an easy decision to make and the best choice available for me.

Q: Have people underestimated your talents as a driver?

HK: I don’t think people have seen the best of me yet, and I don’t think I got the best out of McLaren. My aim at Lotus is to get the best out of the team and the car, and I don’t see any reason why the results won’t come. I don’t think there are any areas I particularly need to improve. Some people think I’m a good qualifier, and not such a good racer, but that’s only been while I was at McLaren. If you look at my time at Renault in 2007 the race performances were actually very strong, and I felt I got more out of the Renault than I did the McLaren. I don’t really care what people think – I’m more determined than ever to do a good job for the team.

Q: Your team mate Jarno Trulli may have an advantage as he’s worked with technical director Mike Gascoyne for many years. How will you muscle into that picture?

HK: I think Jarno and I will fit very well into that picture. I know the direction I want the team to go, and the team obviously wanted to get two experienced drivers on board so we do go in the right direction straight away. Together with Jarno I know we can do that.

Q: The driver announcement in Kuala Lumpur was very emotional and the location and guests were top notch…

HK: I didn’t really know what to expect when I got out there, but I was a little surprised by how well everything went. The team out there are experienced, but not really in terms of F1 so I wasn’t sure how much guidance I’d need to give them. In fact I didn’t have to give them any advice – everything was organised really well, and Tony had made sure all the main people knew what was going on and what they had to do. The Malaysian people were really excited about Lotus coming back as well and the whole atmosphere was very positive.

Q: You are at the factory right now. What is your impression of it? How does it compare to McLaren’s factory in Woking?

HK: It’s obviously very different. In terms of area – Woking and Norfolk – are both very similar. They aren’t big like London, but there are good golf courses around. The facilities are obviously very different. McLaren is a big, hi-tech kind of space centre that nobody else has, and this is where we are building a new operation. When you go from a space station to a building site it’s obviously different, but I know that once the team is fully set up here it will be as efficient as McLaren and we can go for good results.

Q: What is the schedule for the weeks ahead?

HK: We are preparing as well as we can at this time. One thing is that we could possibly join an earlier test. The car would probably be able to run but we wouldn’t have spare parts and we wouldn’t be able to test properly. If we had any problems, the test would be over. So at the third test we know we’ll be able to push the car hard. I can push it to the limit, get a feel for the car and hopefully we can do a lot of mileage. I expect the car to be pretty reliable straight out of the box because Mike and the design team are all experienced people who know how to build a race car. Then the question mark will be how much performance we have. When the factory’s all set up and running we’ll be able to get decent upgrades relatively quickly, and that’s when we’ll see the real performance.

Q: Tony has thrown down the gauntlet to Virgin’s Richard Branson in what could be the funniest bet Formula One racing has ever seen (the loser will spend a day as an air stewardess on the other’s airline). How confident are you that the team will beat Virgin? How much personal pride is involved there do you think?

HK: I’m sure there’s a lot of pride there. They’ve known each other a long time and they’re both very successful, so I’m sure it’s quite personal. I do know Tony will be kicking my ass to beat them, and I fully expect Mike to be doing the same. I think it’s cool – we already have one definite target to aim for. But a lot will depend on how quick the car is. If it’s very quick then we’ll be fighting all sorts of people, but I know that if I see a Virgin car I’ll have to get in front.

Q: When will we see you in the car for the first time?

HK: That will be at the third group test at Jerez. Jarno and I will be sharing the driving equally there, then at Barcelona. It’s not a lot of testing but I’ve done a lot of F1 driving so I’d be ready to go straight to the race if necessary.

source: formula1


Get This Plugin

Contacts and information

Social networks

Most popular categories

T-CREA
© 2011 Fantasy Racings F1 All rights reserved.