Marussia Racing’s new MR01 finally made its first on-track appearance during a promotional ‘filming’ day at Silverstone, just a few miles from is Banbury base.

The Anglo-Russian team endured a torrid time in its attempts to get the car ready for the third and final group test at Barcelona last week, having skipped the opening session in Jerez to prepare the MR01 for early March, only to fail the mandatory FIA crash tests. Although both Timo Glock and rookie Charles Pic got some miles under their belts in Barcelona last month, it was at the wheel of the 2011-spec car, leaving them preciously short of time in the new machine ahead of its race debut in Melbourne next weekend.

The Silverstone shakedown, part of a promotional event ahead of the car’s departure for the Australian Grand Prix, will provide both team and driver with vital information on the new machine, which has been conceived after a ground-up re-evaluation of the way Marussia designs its racing cars. As such, the car is almost entirely new, with very few carry-over components from last year’s Marussia Virgin MVR-02.

The desire to make a clean break from the previous CFD-only creations presented the design team, led by technical consultant Pat Symonds, with the challenge of going back to basics to produce a solid mechanical package, whilst maintaining an eye towards achieving the incremental performance steps required to move the team forward.

The starting point for the design programme was a consideration of the people and resources available to the Banbury-based team. The former three-base operation has been consolidated into one site, the Marussia Technical Centre in Banbury, bringing the various elements of the business together to form ‘one team’. In particular, the design department and practices now benefit from far greater integration and collaboration. Furthermore, the aerodynamic department has been completely restructured and the aero methodology reinforced, blurring the boundaries between CFD and experimental work in the wind tunnel, as well as enhancing the fidelity of the team’s aero approach.

The technical partnership forged with McLaren Applied Technologies in July of last year has also been influential in the design process and the relationship is starting to yield benefit as the advanced facilities that the Marussia team has access to have been used to prove the correlation process with the MVR-02. It is however early in the relationship and the MR01 will become a beneficiary of the relationship in due course.

The key design priorities were to address previous aerodynamic deficiencies and, mechanically, achieve greater weight saving. At the same time, a lot of the detail of the car has been refined and the design team have been a little more adventurous than before, stepping closer to the engineering boundaries. The car can best be described as a significant evolution of its predecessors. The relationship with McLaren is also evident, as the MR01 is only the second car launched this season, after the Woking giant’s MP4-27, to eschew the stepped nose concept favoured by the rest of the field.

“We are very pleased to be running the new MR01 for the first time this morning,” team principal John Booth admitted, “It has been a long and frustrating wait for everyone in the team, but we can now get back on track – literally – and start working towards the first race of the season in Australia next weekend.

“Today is the first of two promotional events, so while the drivers will be able to get a feel for the car, they won’t be able to draw any real conclusions until we start running in anger in Melbourne. Nevertheless, this is an important day for us and we’ll enjoy every minute on track with the new car.”

Glock turned the first laps with the MR01, beginning his third season with the team and providing the all-important element of continuity required to keep moving the package forward. He is joined in 2012 by Frenchman Pic, who embarks on his rookie year in F1, having made the step up from GP2 to replace Belgium’s Jerome d’Ambrosio. Both drivers will get track time with the new car over the next two days, albeit running on demonstration tyres as opposed to the Pirelli P-Zeros that they will use once competition starts in Melbourne.

After months of evaluations and negotiations in which diverse options have been assessed, Spanish team HRT has finally opted for the facilities of the Complejo Deportivo Madrid Caja Mágica to locate its permanent headquarters.

The team will occupy part of the Caja Mágica facilities and will coexist with the Masters 1000 Madrid Open. HRT F1 Team will be specifically situated in the Indoor Sur and Indoor Central buildings, occupying a total surface of 11,000m2.

In only seven months, the new directors have carried out a restructuring process with the objective of providing the team with stability and viability, besides having a new identity. To reach these targets, a lot of hard work has been focused on three fronts in these last three months: the new car, the renewed operational and technical team and a permanent headquarters which, besides from uniting the whole team in a workspace with F1 standards, will contribute an added value to the team.

With the signing of Pedro de la Rosa this past October a long desired objective was accomplished, which was none other than to incorporate a Spanish driver. The recent addition of Narain Karthikeyan completes a driver line-up packed with experience, which is of great value in this new chapter for the team.

The renewal of the technical team started once the 2011 season was over and the new team members have been working ever since at the temporary logistical base in Paterna, Valencia, until the definitive relocation to the permanent headquarters is carried out. The chosen venue had to meet very specific and ambitious requirements.

And the Complejo Deportivo Madrid Caja Mágica meets the requirements that HRT Formula 1 Team considers indispensable for this new chapter. It is a versatile and sustainable space that will take in the different departments that make up the team besides being an area open to fans, sponsors, suppliers and collaborators.

Remodeling and adaptation of the space will begin immediately and it is calculated that in under a month the first workers will be able to move in. The technical and operational sectors of the team won’t do so until Formula 1 returns to Europe but the headquarters is expected to be fully operational for May. The Technical Design Office is anticipated to move in progressively as of early June, thus completing a programme which is calculated to generate more than a hundred jobs with different degrees of specialization.

The headquarters won’t only be a technological and R&D centre, but also a way of getting closer to the public, sponsors, suppliers and collaborators with accessible areas such as a future museum, guided tours or a conference area, whilst also becoming a formation centre.

Electric mobility and sustainability are fundamental aspects for HRT and something it shares with the Complejo Deportivo Caja Mágica. The team is a pioneer in the Formula 1 world after integrating alternative energies to petrol in its mobility plan and using electric bicycles to move around both at Grands Prix and away from them.

The Complejo Deportivo Madrid Caja Mágica is a multifunctional centre designed by the architect Dominique Perrault. It is located in the Parque Lineal del Manzanares, in a space of 17 hectares which includes large garden areas. The design and distribution of this space enables the celebration of all kinds of events, not only sporting ones, such as presentations, spectacles and conventions.

Saúl Ruiz de Marcos, HRT F1 Team CEO: “For us it is fundamental to have a headquarters that, apart from uniting the team and ending with the dispersion, is beneficial from a logistical and industrial point of view. But that also enables us to maintain a closer relationship with our fans, suppliers and sponsors. Madrid and the Caja Mágica facilities fit perfectly with the standards we were looking for. In the last few months we have assessed different options, looked at their pros and cons, and we feel that the decision to establish our permanent headquarters in Madrid was the best one. I want to thank Madrid Espacios y Congresos for the interest they have shown in this going ahead and I’m sure that this relationship will be very beneficial for everyone”.

Luis Pérez-Sala, Team Principal of HRT F1 Team: “We’ve been working hard for months and establishing our permanent headquarters was very important. Finding a space in which we could all work together was vital, in order to optimize work and generate a good team feeling, a sense of belonging. When the adaptation of the facilities is completed and every department starts working under the same roof in a few months, we will only have one step left to take, which is to have the design department in Madrid too. All this implies not only becoming a place to feel identified with and carry out activities for the team, its sponsors, suppliers and fans, but also an important reference in technology and R&D in the centre of Madrid”.

Bridgestone is taking a radical approach to next month’s German grand prix.

After extreme degradation and graining was credited for spicing up the recent Canadian grand prix, many paddock regulars suggested that it is the sport’s approach to tyres that that should be targeted for producing more exciting races.

F1′s sole tyre supplier announced on Monday that for the Hockenheim round late next month, the compounds on offer will be vastly different.

Both supplied compounds must be used at least once during grands prix, and in Germany, they will be the Montreal-spec ‘super soft’ as well as Bridgestone’s hardest tyre.

It is the first time there have been two hardness steps between the supplied compounds.

“The characteristics of the Hockenheim circuit allow us to bring the compounds from the extremes of our softness range,” confirmed head of development Hirohide Hamashima.

“This will give us very good data for evaluation and will be interesting for those who have called for a bigger difference between the allocated tyres.”

He explained that a similar approach was not possible for the subsequent Hungarian, Belgian, Italian and Singapore rounds.

“The Hungaroring requires a softer allocation as finding grip is always a target there.  Spa and Monza are high speed tests for cars and tyres, needing a harder allocation because of the heat durability requirements.

“Singapore is a high-speed street course where the softer allocation is suited,” said Hamashima.

Bridgestone said the compound allocation for the final five rounds of 2010 will be made later in the year.

(GMM)

Virgin Racing, one of the new four cars of this season, this Thursday completed its first tests at the British Silverstone circuit, with the German pilot, Timo Glock at the wheel of the VR-01.

“To see the VR-01 in action was a wonderful moment for me and for all the team.  It’s great to be back in the racetracks,” said the pilot at the end of the testing session.
On the other hand, Nick Wirth, Technical Director pointed out that the 10 month effort of the team paid off.  “Today were the first steps, but the program will really be in action tomorrow, with a full day of evaluation in Timo and Lucas di Grassi’s racetrack.”

Analysis of the new Virgin VR-01

Leaving aside the beginning of his campaign in the media, Virgin made clear at all times that Wirth was going to design the car totally with CDF technologies.  The team believes it’s the most profitable solution.

With scarce time for tests, the VR-01 has already passed the FIA-required crash tests and has rolled its first laps in the British circuit of Silverstone.

Aside from its very attractive line, the VR-01 has quite simple front wing endplates.  And we say simple because it currently does not incorporate a system for the driver to modify the angle of attack of the upper element.  Yet, we will surely see more developments in before it runs in Bahrain.

The nose follows the trend to copy the Red Bull  V nose concept (as well as the rounded underside), and it also has a sharp tip, almost as low as on the Mercedes GP (but longer).  The front wheel suspension is mounted like a unique keel system.  Seems as though the chassis has a small keel under its nose for the lower wishbone.

Rather unusual for new cars are the front brake ducts.  Even though most of the teams have opted for the highest possible position for the ducts, the VR-01 has them pointing downward, attempting to catch the air from under the front wing.  It’s important to consider that in this area, the air can flow faster and be a bit less dense.

The front part of the sidepods is clearly inspired in Brawn’s BGP001 and it’s also quite similar to the 2010 McLaren 2010.  Small and high combined air inlets must prevent an efficient flow of air around the sidepods, providing more potential downforce in the rear end.

This configuration of the sidepod panels will surely help to achieve this goal.  The racing car seems to be quite developed in the middle zone, though the way the mirrors are mounted and their place came as a surprise.

Just like the new Ferrari, the sidepods are rather lean and without sharp curves.  In both cases, the designers opted for a long car capable of placing all the components near the center line.  This Virgin, as well as the Ferrari could be around 5.5 meters long, 70 cm longer than the Mercedes.  While this may prove beneficial in the fast circuits, in twisty road tracks they may become a challenge.  We’ll see…

The back end of the car seems to have some influence from last year’s Red Bull, as for instance, the aggressive slope.  While this puts the upper wishbone mounts completely in view, the suspension system is still a push rod design.

Richard Childress Racing pit crew member Donald “D.J.” Richardson Jr., passed away December 25 in a Massachusetts hospital from ramifications of the H1N1 virus. He was 37.

Richardson, of Leominster, Mass., contracted the H1N1 virus over the Thanksgiving holiday. He was admitted to Health Alliance Hospital in Leominster for evaluation, where it was found he was suffering from acute respiratory distress syndrome.

“All of us at RCR are saddened by D.J.’s passing,” said Richard Childress, president and CEO of Richard Childress Racing. “D.J. was a gifted tire changer, one of the greatest team players in the business and a valued member of the RCR family. Our thoughts and prayers go out to his family and friends.”

Richardson engaged RCR in July 2009 and finished the NASCAR Sprint Cup Series season as the rear-tire changer for the No. 29 Shell-Pennzoil Chevrolet Impala SS team. He began his NASCAR Sprint Cup Series career with Andy Petree Racing in 1999. He has also worked for Penske Racing, Hendrick Motorsports and Braun Racing.

“I am shocked and saddened by the tragic loss of our friend and teammate,” said Matt Clark, director of human performance and leadership development of Richard Childress Racing. “Anyone who knew D.J. realized that below the tough exterior was a caring father, friend and teammate. He had a huge heart and would do anything to help someone in need. D.J. loved changing tires and was recognized as one of the top pit athletes at the position. I want to extend my condolences to his family and friends.”
Funeral arrangements have been made and the viewing will be Tuesday, December 29, from 4 p.m. to 8 p.m., at Silas F. Richardson and Son Funeral Home in Leominster, Mass. The funeral will be Wednesday, December 30, at 11 a.m. at St. Marks Church in Leominster, Mass. In lieu of flowers, a memorial fund for his three children is being established, with details to follow as soon as possible.

Details of a commemoration service in North Carolina are pending and will also be made available as soon as possible.